Performing a DIY oil change on your 2020 Acura RDX is a straightforward task that can save you time and money. Regular oil changes are essential for maintaining engine health and ensuring optimal performance.

What You'll Need

  • Correct grade and amount of engine oil (check your owner's manual)
  • New oil filter
  • Oil filter wrench
  • Socket wrench set
  • Drain pan
  • Funnel
  • Gloves and rags
  • Car jack and stands or ramps (if necessary)

Step-by-Step Oil Change Process

Follow these steps to safely change the oil in your Acura RDX:

  1. Warm up the engine for a few minutes, then turn it off and allow it to cool slightly.
  2. Raise the vehicle using a jack and stands or ramps to access the oil drain plug.
  3. Place the drain pan under the oil drain plug and carefully remove the plug with a socket wrench.
  4. Allow all the old oil to drain out completely.
  5. Remove the old oil filter using the oil filter wrench.
  6. Apply a thin layer of new oil to the rubber gasket of the new oil filter and install it by hand.
  7. Replace the oil drain plug securely.
  8. Lower the vehicle and open the hood.
  9. Using a funnel, pour the correct amount of new oil into the engine.
  10. Check the oil level with the dipstick and add more if necessary.
  11. Start the engine and look for leaks around the drain plug and filter.
  12. Turn off the engine and recheck the oil level.

By following these steps regularly, you help keep your 2020 Acura RDX running smoothly and prolong the life of your engine.