Performing a routine oil change on your 2020 Acura RDX is essential for maintaining engine health and ensuring optimal performance. Regular oil changes help to lubricate engine components, reduce wear, and improve fuel efficiency.

What You’ll Need

  • New engine oil (check owner’s manual for type and quantity)
  • Oil filter compatible with 2020 Acura RDX
  • Oil filter wrench
  • Socket wrench
  • Drain pan
  • Funnel
  • Gloves and rags
  • Car jack and jack stands (if needed)

Step-by-Step Oil Change Process

  1. Warm up the engine for a few minutes, then turn it off and park on a flat surface.
  2. Lift the vehicle safely using a car jack and supports if necessary.
  3. Place the drain pan under the oil drain plug located beneath the engine.
  4. Use the socket wrench to remove the drain plug and let the old oil drain completely.
  5. Remove the old oil filter using the oil filter wrench.
  6. Apply a little new oil to the rubber seal of the new oil filter and install it by hand.
  7. Replace the drain plug and tighten securely.
  8. Pour new engine oil through the oil filler cap on top of the engine using a funnel.
  9. Check the oil level with the dipstick and add more if needed.
  10. Start the engine and check for leaks. Turn off and double-check the oil level again.
  11. Dispose of the used oil and filter responsibly at a recycling center.

Following these steps will help keep your Acura RDX running smoothly. Always consult your owner’s manual for specific recommendations and intervals for oil changes.