Properly breaking in new performance brakes on your Acura RDX is essential to ensure maximum stopping power, longevity, and safety. The break-in process, also known as bedding, helps create an even layer of brake pad material on the rotor surface, reducing the risk of brake judder and noise.

Steps to Break In Your New Performance Brakes

  • Start Slowly: Begin by driving at moderate speeds and applying the brakes gently. Avoid hard stops for the first 200 miles.
  • Perform Progressive Stops: Gradually increase braking intensity with a series of stops from about 30 to 40 mph down to 5 mph. Repeat this 8 to 10 times, allowing the brakes to cool between stops.
  • Cool Down Period: After the progressive stops, drive for several minutes without braking to help the rotors cool evenly.
  • Avoid Sudden Stops: During the break-in period, avoid emergency stops or aggressive braking as this can cause uneven pad material transfer.
  • Inspect and Maintain: After the bedding process, inspect your brake components for any unusual wear or noise and maintain them regularly.

Following these steps ensures your Acura RDX’s performance brakes deliver optimal stopping power and durability. Proper break-in not only enhances safety but also helps you get the most out of your investment in high-performance braking components.